SSM Products

Servilamina Summit Mexicana has the highest standards of operation and packaging for each of their products. Thus SSM meets the needs of its customers.

Also, Servilamina Summit Mexicana works hard every day to maintain improvement scheme inside and outside the company.

Catalog Product


Hot Rolled

Cold Rolled

Galvanized

Galvanneal

Galvalume

Electro Galvanized

Aluminized

Aluminized Stainless

ETP & TFS

Electrical Steel Products


Grain-Oriented

Non-Oriented

Motor Lamination


Hot Rolled Pickled & Oiled

This type of steel is used to manufacture parts that do not require excessive care in surface appearance and should be covered as steel brackets, agricultural implements, etc.

Cold Rolled

It is used in the manufacture of parts with a lot of uses in which the surface appearance and mechanical properties have different levels of importance. This steel is used in punching parts, enclosures, stampings, steel tube, etc.

Galvanized

This steel is immersed in a bath of molten zinc and it's used in parts requiring corrosion resistance at a low cost. is commonly used in washing sheets, corrugated sheets, etc.

Galvanneal

The steel is immersed in a bath of molten zinc and then passes right through an annealing furnace. It is used in parts requiring a uniform zinc coating with good adhesion to resist sausages like body parts in cars.

Galvalume

Pre-painted. Steel coated with a uniform layer of paint. Usually used in embolventes appliances like washing machines and refrigerators.

Electro Galvanized

The steel is immersed in an electrolyte and by means of electricity is forced to deposit zinc on the steel surface. Used for parts requiring a uniform layer of zinc with strict control on appearance. Its use is usually in parts of home appliances.

Aluminized

This type of steel is immersed in a bath of molten aluminum. Steel is used in parts requiring improved corrosion resistance under high temperature and appearance, for example, in lining leaks in cars.

Stainless & Aluminized Stainless

This type of steel is added nickel to inhibit oxidation and improve the mechanical properties. Steel is used where high structural strength, resistance to corrosion and high temperatures and non-toxic properties is required.

ETP (Electrolytic Tinplate) & TFS (Tin Free Steel)

ETP provides good weldability and electrical conductivity and high corrosion resistance. The price of TFS is somewhat cheaper than the tin and not suitable for electric welding.

Grain-Oriented

Electrical steel with a strict control of the crystal orientation with respect to the cutting blade. Typically used in large power transformers and distribution transformers and certain audio output.

Non-Oriented

Electric steel no special processing done to control the crystal orientation. This steel contains a significant level of silicon isotropic magnetic properties. Commonly used in the cores of power transformers and distribution.

Motor Lamination

Electric steel with easy stamp and low wear. Also minimizes energy loss. It is commonly used in transformers, generators and motors.